| Issue |
E3S Web Conf.
Volume 614, 2025
International Conference on Agritech and Water Management (ICAW 2024)
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 9 | |
| Section | Renewable Energy Sources and Energy-Saving Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202561401012 | |
| Published online | 07 February 2025 | |
Energy-efficient milling approaches: Minimizing environmental impact in RC-profile shaft formation through optimized tool geometry
Southwest State University, 305040 Kursk, Russia
* Corresponding author: yuliyamaximencko2010@yandex.ru
The article is devoted to the study of the effect on the error of forming RK-profile shafts of various tooth arrangements of the enclosing milling cutter. The schemes of arrangement with a uniform (constant) angular pitch and an uneven angular pitch were considered. The values of the numbers of teeth providing a given shaping error corresponding to various accuracy standards are established. A scheme and procedure for calculating angular positions with a symmetrical arrangement of teeth with uneven pitch are proposed.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.