Uniaxial compression of dry wood: experiment and modeling

Petrozavodsk State University, Lenin Str., 33, Petrozavodsk, 185910, Russia

^* Corresponding author: kolesnikovgn@ya.ru

Abstract

The paper considers the dependence of the load on displacement during uniaxial compression of spruce wood samples with an adjustable deformation rate (1 mm/min); the water content in the samples was equal to 6.4%. The study focuses on the analysis of criteria for brittle destruction of wood and its transition to a plastic state. The concept of virtual material transformation (CoViMT) forms the basis of the research. At the idea level, this concept is a variant of the well-known equivalent material concept (EMC). An integral criterion for brittle fracture was developed. Comparison with experimental data showed that the integral criterion and the known differential criterion lead to mismatched points of brittle fracture and transition of wood to the plastic state. Therefore, it is possible to determine the boundaries of the region of plastic states with the help of these criteria. Experiments confirmed the adequacy of the criteria when compressing wood with 6.4% and 18.0% moisture content. However, the volume of studies of the problem touched upon is small, so further research is necessary to better understand the stages of deformation of wood of different species.