Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
---|---|---|
Article Number | 01065 | |
Number of page(s) | 8 | |
Section | Materials Science Innovations, Green Chemistry and Emission Reduction | |
DOI | https://doi.org/10.1051/e3sconf/202338901065 | |
Published online | 31 May 2023 |
Evaluation of the effectiveness of the use of additive wax printing technologies for obtaining wax models for lost-wax casting in custom production based on simulation modeling
Moscow State University of Technology “STANKIN”, 127055 Moscow, Russia
* Corresponding author: pnikishechkin@gmail.com
The article discusses the technology of casting according to the smelted models, in particular, the processes of manufacturing wax models. We considered methods of manufacturing elements of model blocks with the use of molds and with the help of additive technologies. In this paper we showed the features of the application of additive technologies in the lost-wax casting. A simulation model has been developed to evaluate the effectiveness of using additive wax printing technologies to produce wax models. Based on the results of simulation modeling, conclusions were made about the feasibility of using additive technologies in casting according to smelted models.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.