Issue |
E3S Web Conf.
Volume 474, 2024
X International Annual Conference “Industrial Technologies and Engineering” (ICITE 2023)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 6 | |
Section | Energy Sciences, Engineering and Industry | |
DOI | https://doi.org/10.1051/e3sconf/202447401005 | |
Published online | 08 January 2024 |
Calculation of technological cycles of manufacturing model blocks for the lost-wax casting method, taking into account the stability coefficient of the duration processes
MSUT “STANKIN”, Moscow, Russia
* Corresponding author: Dolgov_nikita@list.ru
The paper considers the technological cycles of obtaining wax models in automatic molds, in manual molds and by the additive method. The cyclograms of the work of the site for obtaining model blocks consisting of wax models are shown. The dependences of the duration of time cycles for the considered methods of obtaining wax models are presented. It is revealed that the production of wax models in automatic molds is the most productive method, however, this method has the longest cycle of technological preparation of production. The production of wax models in manual molds has a cycle duration comparable to the previous method of technological preparation of production, however, the cycle duration of obtaining wax models for this method is longer. The additive method makes it possible to produce products with a minimum duration of the pre-production cycle. The main operations of manufacturing wax models by the methods under consideration are revealed. The influence of the stability coefficient of operations on the work organization of the site for production wax models is analyzed.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.