E3S Web of Conf.
Volume 389, 2023Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|Number of page(s)||6|
|Section||Sustainable Transport and Green Logistics|
|Published online||31 May 2023|
Influence of coatings based on Zr and Ti on the wear resistance of cemented carbide tools when turning transport machines’ parts from structural steels
Don State Technical University, 1, Gagarin Sq., 344002 Rostov-on-Don, Russia
* Corresponding author: firstname.lastname@example.org
The influence of coatings based on titanium carbide and zirconium carbide, obtained by PVD method, on cutting tool wear resistance under conditions of the longitudinal turning of transport machines’ parts of steel 45 and stainless steel 12H18N10T by inserts of hard alloy grade T15K6 was investigated. It has been experimentally established that the presence and composition of the coating on the working surfaces of the tool in most cases contributes to a significant reduction in the intensity of wear of cemented carbide inserts. When turning stainless steel 12H18N10T, the best result was demonstrated by the coating ZrN + (Ti–Zr) N + TiN, which provided not only the minimum intensity of wear, but also the expansion of the range of optimal cutting speeds. When machining structural steel 45, the maximum reduction in the wear intensity of the cutting inserts was observed with the use of a single-layer TiN coating and a (Ti,Zr)N coating.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.