| Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
|---|---|---|
| Article Number | 07006 | |
| Number of page(s) | 6 | |
| Section | IT in Environmental Science | |
| DOI | https://doi.org/10.1051/e3sconf/202338907006 | |
| Published online | 31 May 2023 | |
Calculating the mobile electronic charge unit operating performance in COMSOL software
Kazan State Power Engineering University, 51 Krasnoselskaya St., 420066, Kazan, Russia
* Corresponding author: vasiliybas123@mail.ru
The development of numerical analysis methods and, first of all, the finite element method (FEM), makes it possible to obtain accurate solutions for quite complex objects. Such objects include mobile electric vehicle charging units (MCUs). The MCU under development will have a rather complex design, experiencing significant static and dynamic loads in operation, so their reliable calculation is possible only with the help of FEM, which allows multivariant calculations with identification of weak points of the design.
Key words: mobile electric vehicle charging device / design operability / COMSOL software
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.