| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 01038 | |
| Number of page(s) | 7 | |
| Section | Agritechnologies and Environmental Engineering for Sustainable Environmental Health | |
| DOI | https://doi.org/10.1051/e3sconf/202339001038 | |
| Published online | 01 June 2023 | |
Ensuring the stability of the suspended chisel-cultivator processing depth
1 Scientific-Research Institute of Agricultural Mechanization, Samarkand str. 41, Yangiyul dis., Tashkent reg., Uzbekistan
2 ”Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Kari Niyazi str. 39, Tashkent, 100000, Uzbekistan
* Corresponding author: abduraxmon_qxmei@mail.ru
The depth of tillage and its uniformity are the main performance indicators of chisel cultivators, as well as all tillage machines. Only when these indicators are at the level of demand, favorable conditions are created for the uniform development and ripening of crops throughout the field and their high yield. The article theoretically explores the problem of ensuring a smooth movement of the suspension chisel cultivator along with the working depth. The results show that the given depth of tillage and its uniformity at the required level is mainly due to the correct selection of the vertical distance from the base plain of the chisel-cultivator to the lower hanging points. The vertical distance from the base plain to the lower hanging points must be at least 48.1 cm in order for the condition N>0 to be fulfilled and the chisel-cultivator to sink to the specified depth and run steadily at this depth. Suspended chisel-cultivators with 3-4 class wheeled tractors, which are widely used in agricultural production of the republic, the vertical distance from the base plains to the lower hanging points. Determined to be at least 48.1 cm.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.