| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 03029 | |
| Number of page(s) | 5 | |
| Section | Information Technologies, Automation Engineering and Digitization of Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202339003029 | |
| Published online | 01 June 2023 | |
Digging and cleaning collectors using excavators equipped with innovative automatic control navigator
1 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Kory Niyoziy str., 39, Tashkent, 100000, Uzbekistan
2 department of General Technical Sciences, Higher military aviation educational institution of the Republic of Uzbekistan, Jayhun, Karshi, Uzbekistan
* Corresponding author: sarkor.93@mail.ru
This article presents the problems of guaranteeing high work productivity in the digging or cleaning of ditches and collectors, as well as the implementation of design indicators, as specified in the project, and measures to eliminate them using modern innovative technologies. Ditch and collectors work at the level of demand, improve land reclamation conditions, increase productivity and reduce the volume of additional earthworks, increase economic efficiency to high levels. The results of the conducted scientific research showed that during the construction of the open pit, the volume of earthworks was reduced by 15%, and the carrying capacity of the stream was increased by 25%. As a result, it makes it possible to increase the reliability and maintain the technical condition of using open pits.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.