Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
---|---|---|
Article Number | 06008 | |
Number of page(s) | 10 | |
Section | Agricultural Mechanization, Civil Engineering and Energetics | |
DOI | https://doi.org/10.1051/e3sconf/202339006008 | |
Published online | 01 June 2023 |
Mathematical modeling of the temperature regime in industrial premises
1 FSBEI HE "Udmurt State Agrarian University", 11, Studencheskaya St., Izhevsk, 426069, Russia
2 FSBEI HE "Udmurt State University", 1, Universitetskaya St., Izhevsk, 426034, Russia
* Corresponding author: kasww@mail.ru
Comfortable temperature conditions in any room are provided by heating systems, thermal insulation properties of enclosing structures, external environmental conditions. Practical experience, literature analysis show that the existing temperature control systems in industrial premises have disadvantages. Eliminating is possible by using a multi-circuit functional control structure, allowing to reduce the inertia of the temperature control system by taking into account the outdoor temperature, the influence of natural light on the temperature inside the production facility. For its operation, a practically oriented mathematical model is needed, which allows taking into account the influence of a large number of external factors on the temperature regime with minimal delay. A mathematical model has been developed for use as a program in industrial electronics devices for predicting, correcting the temperature field, regulating the temperature regime in the production areas of a room at any point. Based on experimental data, the analysis of the results of the adequacy of the mathematical model shows that the temperature values obtained by the mathematical model of forecasting, correction of the temperature regime fall within the confidence interval and are within the standard deviation. The mechanism of technical implementation is proposed and the prospects of its use are shown.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.