| Issue |
E3S Web of Conf.
Volume 390, 2023
VIII International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-VIII 2023)
|
|
|---|---|---|
| Article Number | 06041 | |
| Number of page(s) | 6 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202339006041 | |
| Published online | 01 June 2023 | |
Comb-forming roller with elastic rods
Karshi engineering-economics institute, 225, Mustakillik str., 180100, Karshi, Uzbekistan
* Corresponding author: asror69@mail.ru
A design diagram of comb formation roller in resilient stems is given. Comb-forming roller consists of support and small discs, as well as elastic rods. Elastic rods are installed along the perimeter of the diameter of the disks through their holes. Analytical dependences and mathematical models are obtained for determining the distance between disks, the diameter of disks, the diameter, length and number of elastic rods. One-factor experiments were carried out to substantiate the diameter of the disks and the number of rods. It was found that with the length of the elastic rods of the comb-forming roller 65-75 cm, the diameters of large, medium and small discs, respectively, at least 600mm, 550 mm and 200 mm, the angle of sharpening of the discs within 55-650, the issue of stems within 64 - 69 trimming and diameter bars 3 mm, intensive defeat of chunk and high- quality creation of ridges is ensured.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.