| Issue |
E3S Web of Conf.
Volume 365, 2023
IV International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2022)
|
|
|---|---|---|
| Article Number | 04027 | |
| Number of page(s) | 7 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202336504027 | |
| Published online | 30 January 2023 | |
Physico-mechanical properties of seed pile of fodder crops
1 Karshi Engineering Economic Institute, Karshi, 180100, Uzbekistan
2 Karshi Institute of Irrigation and Agricultural Technologies, Karshi, 180119, Uzbekistan
The purpose of the study is to study and analyze the physical and mechanical properties of the seed pile of fodder crops. The results of determining the physico-mechanical properties of the seed pile of fodder crops obtained in the combing clover plants with a comb of the combing drum of the harvesting machine are presented. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. It was found that the stiffness of the stems of the seed pile at a humidity of 40-60% is in the range of 0.07-0.008 N / m2. At the same time, with a moisture content of 35-65%, its bulk mass is 80-185 kg/ m3, respectively. The minimum value of the angle of the natural slope of the clover seed pile is 48o, and its maximum value reaches up to 90o; the value of the static friction coefficient at a humidity of 40-60% is within 0.98-1.02, and the value of the dynamic friction coefficient is within 0.5-0.7. The pile's temperature is directly proportional to the storage time; during self-heating, the appearance of the pile gradually changes depending on the storage time and temperature duration.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.