| Issue |
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01098 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202339101098 | |
| Published online | 05 June 2023 | |
Zeta Converter Based Battery Charger for Ev
Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India
* Corresponding author: author@email.org
This paper proposes a zeta converter-based battery charger. A Zeta converter is a DC-DC converter that has non inverted output and works as buck-boost converter. The converter output can be adjusted to get maximum power from the PV system. This power is used to charge the EV battery. Using P & O method Simulation is done through MATLAB The Hardware consists of Zeta Converter which is fed through PV Array and the converter is triggered using Arduino nano, therefore battery gets charged by Zeta Converter.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.