| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 13 | |
| Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202340101059 | |
| Published online | 11 July 2023 | |
Shafts of technological machines with combined supports
1 Tashkent State Transport University, Tashkent, Uzbekistan
2 Branch of the Russian State University named after I.M. Gubkin in Tashkent, Tashkent, Uzbekistan
* Corresponding author: ysz1979@gmail.com
This article discusses experimental studies of a saw cylinder (SC) composite shaft with combined support. We proposed a new design of the support that provides a reduction in the shaft. The article considers the influence of changing the parameters of the elastic element of the support of the composite shaft (CS) of the SC using the ANSYS software, calculates and analyzes the reaction forces of the supports for different parameters of the elastic elements, and also considers the effect on the stresses of the system, as well as the results of experimental and comparative tests in production conditions on the SC of the cotton gin machines with a composite bearing, where the parameters of the elastic element differ from each other by different elasticity. The fiberization process took place according to the established technological parameters. The experimental and standard SC models were compared during the experiment.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.