Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 01059 | |
Number of page(s) | 13 | |
Section | Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction | |
DOI | https://doi.org/10.1051/e3sconf/202340101059 | |
Published online | 11 July 2023 |
- Djurayev A., Yunusov S., Mirzaumidov A. Research to improve the design of the node of the saw cylinder gin. International journal of advanced research in science, engineering and technology, Vol. 6(6), (2019) [Google Scholar]
- Djurayev A., Yunusov S., Mirzaumidov A. Development of an effective design and calculation for the bending of a gin saw cylinder. International Journal of Advanced Science and Technology, Vol. 29(4), pp. 1371-1390. (2020). [Google Scholar]
- Agzamov M.,Yunusov S., Gafurov J. On the technological development of cotton primary processing, using a new drying-purifying unit. In IOP Conference Series: Materials Science and Engineering, Vol. 254(8), (2017) [Google Scholar]
- Yunusov S., Agzamov M., Kamolov N., Pardayev Kh. Influence Of Ginning For Paddle Roll Speed Raw Roller Saw Gin. Test Engineering and Management. pp. 3908 – 3917 (2020). [Google Scholar]
- Juraev A., Magrupov A., Yunusov S., Mirzaumidov A., Makhmudova Sh. UZ IAP 06790 Patent of the Republic of Uzbekistan. Supports for vibration damping of rotating shafts, (2022). [Google Scholar]
- Yunusov S., Sultonov A., Rakhmatov M,. Bobomurotov T., Agzamov M., (2021). / Results of studies on extending the time operation of gin and linter grates. In E3S Web Conf. Vol. 304, (2021) [Google Scholar]
- Murodov O.J., Djuraev A., Narmatov, E.A. Analysis of the vibrations of a console column made on a base with non-line protection in gin. Journal of Physics: Conference Series, Vol. 1889(4), (2021) [Google Scholar]
- V.V.Gurin, V.M.Zamiatin, A.M.Popov. Machine parts and design basics. Proc. for universities. Tomsk: Publishing House of the Tomsk Polytechnic University, p.427, (2010) [Google Scholar]
- Yang H., Li, J., Li, X., Calculation of the Dynamic Characteristics of Ship's Aft Stern Tube Bearing Considering Journal Deflection. Polish Maritime Research, Vol. 27(1), рр. 107-115. (2020) [CrossRef] [Google Scholar]
- Marcinkevičius A.H., Vilnius Gediminas. Automatic control of longitudinal form accuracy of a shaft at grinding. Technical University, Basanavičiuas 28, 03224 Vilnius, Lithuania. [Google Scholar]
- Liu Y., Li J., Wang T., Ding Y., Wang G. Study on the friction resistance calculation method of a flexible shaft of wire rope based on genetic algorithm. pp. 2836-2844 (2021). [Google Scholar]
- Birger I. A. Calculation for the strength of machine parts: Directory/№ 4th ed., M.: Mashinostroenie, p. 640. (1993). [Google Scholar]
- Atstupinas V.R. Investigation of the radial stiffness of rolling bearings, taking into account their manufacture. Vibrotechnics, Vilnos, №. 4 (13) (1970) [Google Scholar]
- Bochkov V.S. Static of angular contact bearings. Proceedings of the Institute / VNIPP, 1966, No. 3, pp. 94-110. (1966). [Google Scholar]
- Zhuravlev V.F. The problem of equilibrium of a non-ideal ball bearing”. // Solid State Mechanics, №. 4, pp. 72-77 (1970). [Google Scholar]
- Kovalev M.P. Supports and suspensions of gyroscopic devices. M.: Mechanical engineering, 287, pp. (1970). [Google Scholar]
- Kharlamov S.A. On the rigidity of a radial-thrust bearing with axial interference. Mechanics and Engineering, № 5, pp. 139-141. (1962). [Google Scholar]
- Yavlensky A.K., Yavlensky K.N., Theory of dynamics and diagnostics of rolling friction systems. Leningrad University Publishing House, pp. 184. (1978). [Google Scholar]
- Novikov L.V. Determination of natural frequencies of oscillations of an electric motor associated with the nonlinear elasticity of bearings, Mechanics and Engineering, № 6, pp. 84-90. (1961). [Google Scholar]
- Pavlov V.A. Fundamentals of design and calculation of gyroscopic instruments, L.: Shipbuilding, p. 408. (1967). [Google Scholar]
- Nikitin E.A. Gyroscopic systems. Elements of gyroscopic devices. Moscow: Higher school, p.472. (1972). [Google Scholar]
- O. Toirov and N. Tursunov. Development of production technology of rolling stock cast parts, E3S Web of Conferences, Vol. 264, p. 05013 (2021). [Google Scholar]
- O. Toirov, N. Tursunov, Sh. Alimukhamedov, and L. Kuchkorov. Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties, E3S Web of Conferences, Vol. 365, p. 05002 (2023). [CrossRef] [EDP Sciences] [Google Scholar]
- L. Kuchkorov, Sh. Alimukhamedov, N. Tursunov, and O. Toirov. Effect of different additives on the physical and mechanical properties of liquid-glass core mixtures, E3S Web of Conferences Vol. 365, p. 05009 (2023). [CrossRef] [EDP Sciences] [Google Scholar]
- Turakulov M., Tursunov N., and Alimukhamedov S. Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron. In E3S Web of Conferences, Vol. 365, p. 05006 (2023). [CrossRef] [EDP Sciences] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.