| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04028 | |
| Number of page(s) | 9 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104028 | |
| Published online | 11 July 2023 | |
Parameters of mini straw grader
1 Karshi engineering-economics institute, Karshi, Uzbekistan
2 Termiz Institute of Engineering and Technology, Termez, Uzbekistan
* Corresponding author: r.nargiza@mail.ru
The purpose study is to substantiate the parameters of a mini straw shredder. The diagram rotor of a cone-shaped shredder is given. The basic laws of theoretical mechanics and mathematical analysis were used in theoretical studies to substantiate the parameters mini shredder. Single-and multifactorial experiments were carried out when determining the optimal parameters mini shredder. In theoretical studies, analytical links were obtained to determine the length of the mini straw grader knife, the slope angle, its base, and the force required to cut the straw. According to the results of studies, the degree of grinding salmon and energy consumption depended mainly on the length blade, the mass balancing truck, and the slope angle blade. It is established that to ensure the required fullness of grinding with minimal energy consumption, the length knife should be within 87.66-88.38 mm, the weight of the balancing weight should be 0.0368-0.0536 kg, and the angle of inclination of the knife 2848º.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.