Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 04028
Number of page(s) 9
Section Mechanization, Electrification of Agriculture and Renewable Energy Sources
DOI https://doi.org/10.1051/e3sconf/202340104028
Published online 11 July 2023
  1. Godwin R J and O’Dogherty M J 2007 Integrated soil tillage force prediction models J. of Terramechanics 44(1) pp 3–14 [CrossRef] [Google Scholar]
  2. Мaiviatov F, Karshiev F, Gapparov Sh IOP Conf. Series: Earth and Environmental Science 868 012060 (2021). [CrossRef] [Google Scholar]
  3. Bulgakov V, Pascuzzi S, Adamchuk V, Ivanovs S and Pylypaka S 2019 Soil and Tillage Research 195, 104406. [Google Scholar]
  4. Gupta C P and Surendranath T 1989 Soil and Tillage Research 13(2) pp 123–149 [CrossRef] [Google Scholar]
  5. Мaiviatov F,Ravshanov K,Mamatov S,Temirov I,Kuvvatov D,Abdullayev A. IOP Conf. Series: Earth and Environmental Science 868 012066 (2021) [CrossRef] [Google Scholar]
  6. Mamatov F, Umurzakov U, Mirzaev B, Eshchanova G, Avazov I. E3S Web of Conferences 264 04065 (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  7. Vilde A 2008 Engineering for Rural Development vol 1 Issue 7 pp 141–146 [Google Scholar]
  8. Tulaganov B, Mirzaev B, Mamatov F, Yuldashev Sh, Rajabov N, Khudaykulov R F IOP Conf. Series: Earth and Environmental Science 868 012062 (2021) [CrossRef] [Google Scholar]
  9. Chancellor W.J. Energy Requirements of Cutting Forage Agricultural Engineering. 1958. 39 (October): – Pp. 188. [Google Scholar]
  10. Astanakulov K D, Babaev Kh M, Eshankulov Kh M, Turdibekov I M IOP Conference Series: Earth and Environmental Science, 1112(1) 012008 (2022). [CrossRef] [Google Scholar]
  11. Astanakulov K D, Kurbonov F K, Shomirzaev M K IOP Conference Series: Earth and Environmental Science, 1076(1) 012032 (2022) [CrossRef] [Google Scholar]
  12. Jekendra Y, Singh P, Energetics of forage chopping, AMA. 1991. 22(1): Pp. 59-63. [Google Scholar]
  13. Yanovich V P, Kupchuk I M Determination of rational Operating parameters for a vibrating dysk-type grinder used in ethanol industry. INMATEH -Agricultural Engineering. 2017. 52 (2). pp. 143-148. [Google Scholar]
  14. Dabbour M I, Bahnasawy A, Ali S, El-Haddad Z Journal of Fodder Processing Technology, 2015. №69. pp.100-108. [Google Scholar]
  15. Hers R., Boyle Ch., Jutras I., Molica Ch., Ziegler E. An Interactive Qualifying Project submitted of the faculty of Workester Polytechnic Institute, 2012. – 48 p. [Google Scholar]
  16. Chahecller W.J., Energy Reguizements forcuttungforoge Agric. Engng, 1958, № 10, pp 68-71. [Google Scholar]
  17. El-Adawy T A, Rahma E H, El-Bedawey A A and El-Beltagy A E 2004 Plant Foods for Human Nutrition 58 (10) 1-13 [Google Scholar]
  18. Tekin Y, Ishik E, Unal H and Okursoy R 2006 Physical and mechanical properties of Turkish Goynuk bombay beans (Phaselis vulgaris L.) J. Biol. Sci. 12 (9) 2229-2235 [Google Scholar]
  19. Unal H, Ishik E and Alpsoy H C 2006 Some physical and mechanical properties of black-eyed pea, (Vigna unguiclata L) grains Journal of Biological Sciences 9 (9) 17991806. [Google Scholar]
  20. Sattarov N E, Borotov A N, Yunusov R F and Yangiboev A E 2022 IOP Conference Series: Earth and Environmental Science 1076 012081. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.