| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 03003 | |
| Number of page(s) | 10 | |
| Section | Mathematical Modeling, IT, Industrial IoT, AI, and ML | |
| DOI | https://doi.org/10.1051/e3sconf/202340203003 | |
| Published online | 19 July 2023 | |
Development of an assistant chat-bot with voice control elements for teaching how to work with the CNC system
MSUT “STANKIN”, 127055, Vadkovskiy per., 1, Moscow, Russia
* Corresponding author: r.nezhmetdinov@stankin.ru
The article discusses the principle of building a voice assistant for learning how to work with the “AxiOMA Control” CNC system. Methods for solving the problem of designing voice assistants are compared, including: speech recognition, dialogue mode and speech synthesis mode. Developed own methodology applicable to the learning process. On the basis of the methodology, a block diagram and algorithms for the operation of an intelligent assistant have been developed. A program is proposed for generating images with hints, as well as a set of files for generating sound files describing the operation of the CNC system. Testing was carried out and program changes were made to the project.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.