| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 03054 | |
| Number of page(s) | 8 | |
| Section | Mathematical Modeling, IT, Industrial IoT, AI, and ML | |
| DOI | https://doi.org/10.1051/e3sconf/202340203054 | |
| Published online | 19 July 2023 | |
Issues of development of research equipment elements by FDM printing
Nizhnekamsk Chemical Technology Institute, 420570 Nizhnekamsk, Russia
* Corresponding author: sabanaevia@nchti.ru
The article presents the results of the analysis on the issue of using additive technologies in the field of chemistry and petrochemistry. Possible areas of application are identified and a range of tasks in the practice of scientific experiment in the study of chemical and petrochemical processes that can be effectively solved with the help of such tools are outlined. It is shown that low-cost methods for developing models of technological equipment elements based on FDM printing can be quite effectively applied in practice. The conclusion is made on the basis of a study of the strength, resistance to strong solvents and tightness of the created structures.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.