| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 07013 | |
| Number of page(s) | 5 | |
| Section | High-Performance Buildings, Energy Modeling, Heat & Mass Transfer | |
| DOI | https://doi.org/10.1051/e3sconf/202340207013 | |
| Published online | 19 July 2023 | |
Technological methods of improvement and influence on the rotor rotation speed on efficiency of barley hushing machine
Tashkent Chemical-Technological Institute, 100000 Tashkent, Uzbekistan
* Corresponding author: Ulug85bek77-mail.ru
The article provides the results of a study of the impact of different parameters and the process of peeling barley in the production offeed. Theoretical studies and analysis of the structures of the peelers and the proposed horizontal peeler have suggested that the rational rotation rate of the rotor during barley peeling will be between 1500 and 1800 rpm. After the studies, a number of factors were tested which influenced and increased the efficiency of barley peeling, which determined the effect of rotor rotation frequency, processing duration, the amount of product pass through processing during, the peeler. Based on the research, the technological parameters of the peeler have been developed andimproved.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.