E3S Web of Conf.
Volume 406, 20232023 9th International Conference on Energy Materials and Environment Engineering (ICEMEE 2023)
|Number of page(s)||5|
|Section||Biological Device and Material Structure Analysis|
|Published online||31 July 2023|
Influence of Monitor Current on Electrical Performance of Photovoltaic Module (PERC/HJT/Topcon) in Thermal Cycle Test
School of Electronic Science and Engineering, Southeast University, Nanjing, P.R China
* Corresponding author: Weixin Zhou, E-mail: firstname.lastname@example.org
IEC 61215-2: 2016 is an international standard about testing photovoltaic (PV) module reliability, in which the thermal cycle (TC) test item mainly has focused on thermal stress interaction of PV modules between different materials. At TC testing different stages, except for high working current (Imp), low current (Max. 1 %*Imp) has been turned on continuously as monitor current in order to evaluate the field operation situation of photovoltaic modules. In this paper, the test programme are designed meticulously and I-V data&EL pictures test results are discussed according to the influence level of monitor current on PERC, HJT and TOPCon modules. Three types of PV modules have performed the respective I-V characteristics and thus the values of Isc, Voc and Pmp have appeared different trends.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.