Open Access
| Issue |
E3S Web of Conf.
Volume 406, 2023
2023 9th International Conference on Energy Materials and Environment Engineering (ICEMEE 2023)
|
|
|---|---|---|
| Article Number | 01016 | |
| Number of page(s) | 5 | |
| Section | Biological Device and Material Structure Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202340601016 | |
| Published online | 31 July 2023 | |
- IEC61215-2: 2016, Terrestrial photovoltaic (PV) modules-design qualification and type approval -Part 2: Test procedures [S]. https://advsearch.iec.ch/ords/f?p=117:104:0 [Google Scholar]
- Hu Chaojie. Study on influence of current continuity monitoring on environmental test results of PERC mono-silicon PV modules [J]. Solar Energy, 2022 (03): 65-69. doi: 10.19911/j.1003-0417.tyn20201126.02. [Google Scholar]
- Nochang Park, Jaeseong Jeong, Changwoon Han. Estimation of the degradation rate of multi-crystalline silicon photovoltaic module under thermal cycling stress [J]. Microelectronics Reliability. 2014, 54: 1562-66. doi: 10.1016/j.microrel.2014.03.021. [CrossRef] [Google Scholar]
- Abdellatif Bouaichi, Ahmed Alami Merrouni, Charaf Hajjaj, et al. In-situ evaluation of the early PV module degradation of various technologies under harsh climatic conditions: The case of Morocco [J]. Renewable Energy. 2019, 143:1500-18. doi: 10.1016/j.renene.2019.05.091. [CrossRef] [Google Scholar]
- Jianxiong Nia, Yali Wangb, Chao Maa. Simulating and analyzing the thermal cycle behaviors of conductive film bonding PV module [J]. Solar Energy. 2017, 158: 922-28. doi: 10.1016/j.solener.2017.10.019. [CrossRef] [Google Scholar]
- Issa Faye, Ababacar Ndiaye, Rudolph Gecke, et al. Experimental study of observed defects in mini-modules based on crystalline silicone solar cell under damp heat and thermal cycle testing[J]. Solar Energy. 2019, 191: 161-166. doi:10.1016/j.solener.2019.08.054 [CrossRef] [Google Scholar]
- S. Kawai, T. Tanahashi, Y. Fukumoto, et al. Causes of degradation identified by the extended thermal cycling test on commercially available crystalline silicon photovoltaic modules[J]. IEEE Journal of Photovoltaics, 2017, 7(6): 1511-18. doi: 10.1109/JPHOTOV.2017.2741102. [CrossRef] [Google Scholar]
- Ying Dua, Luchuang Wangb,c, Wusong Tao. Modeling, imaging and resistance analysis for crystalline silicon photovoltaic modules failure on thermal cycle test[J]. Engineering Failure Analysis. 2020, 118: 104818. doi: 10.1016/j.engfailanal.2020.104818 [CrossRef] [Google Scholar]
- Osarumen O. Ogbomo, et al. Effect of coefficient of thermal expansion (CTE) mismatch of solder joint materials in photovoltaic (PV) modules operating in elevated temperature climate on the joint’s damage [C]. Procedia Manufacturing. 2017, 11: 1145-52. doi: 10.1016/j.promfg.2017.07.236. [CrossRef] [Google Scholar]
- Peng JQ, Shen HL, Wei QZ, et al. Influence of electrical injection annealing on property of multi-crystalline silicon PERC solar cell[J]. Acta Photonica Sinica. 2019, 48(6): 0616002. doi:10.3788/gzxb20194806.0616002. [CrossRef] [Google Scholar]
- Brett J. Hallam, Phill G. Hamer, Sisi Wang, et al. Advanced hydrogenation of dislocation clusters and boron-oxygen defects in silicon solar cells[C]. Energy Procedia. 2015, 77: 799-809. doi: 10.1016/j.egypro.2015.07.113. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.