E3S Web of Conf.
Volume 410, 2023XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|Number of page(s)||8|
|Section||Modern Building Materials|
|Published online||09 August 2023|
Effect of mineral additives on the adherence strength of reinforced concrete with increased corrosion resistance
1 Moscow State University of Civil Engineering, 26, Yaroslavskoye shosse, Moscow, 129337, Russia
2 Hanoi University of Mining and Geology, 18 Vien Street, Duc Thang Ward, Bac Tu Liem District, Hanoi, Vietnam
* Corresponding author: firstname.lastname@example.org
The purpose of this study was to evaluate the corrosion resistance of steel reinforcement in concrete samples containing modifying additives using an accelerated electrochemical corrosion method. It was found that the adhesion strength between the reinforcement and the cement stone of concrete largely depends on the corrosion resistance of the reinforcement in concrete. At the same time, the best result from the tested concretes was shown by the developed concrete of optimal composition, in which the adhesion strength between concrete and reinforcement is 1.7 times higher than that of control concrete without mineral additives. The obtained results can be explained by the fact that an increase in the density of concrete due to the modification of its structure with organo-mineral additives leads not only to an increase in its strength, but also to a better protection of steel reinforcement in concrete from corrosion. This will help to increase the durability of reinforced concrete structures of offshore hydraulic structures in Vietnam and increase the period of their maintenance-free operation.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.