E3S Web of Conf.
Volume 410, 2023XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|Number of page(s)||8|
|Section||Modelling and Mechanics of Building Structures|
|Published online||09 August 2023|
Structure formation of hyper-compacted and modified concrete
1 “Tashkent Institute of Irrigation and Agricultural Mechanization Engineers” National Research University, Tashkent, Uzbekistan
2 Tashkent State Transport University, Tashkent, Uzbekistan,
3 Technical University of Berlin (TU Berlin), Berlin, Germany
4 Eberswalde University for Sustainable Development (HNEE), Germany
5 YEOJU Technical Institute in Tashkent, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
Production of axisymmetric products -pressure and non-pressure pipes, rings, wells, bridges and drainage elements represents one of the main branches of construction industry in water and wastewater industry of Uzbekistan and Central Asian republics. However, positive tendencies of its development are only emerging and still do not meet the potential of progressive, competitive and economical modern technology, capable of providing significant shifts in reduction of resource intensity of new products, expansion of raw material base of construction industry and involvement of technogenic products into its balance, as well as solution of important economic and environmental problems.
Prospects for further development of high-efficiency tubular goods production and scientific and technological progress of their production are largely determined by the importance of regularities and methods of controlling technological processes of structure formation with regard to given high level of product quality and criteria of resource intensity of production.
In this regard, the analysis of general regularities of material structure formation in the complex process of hypercompaction and cementations modification in axisymmetric concrete is of primary importance.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.