| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 6 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302006 | |
| Published online | 11 August 2023 | |
Modeling of continuous molding process with elsatic composite working tool
Bauman Moscow Technical University, ul. Baumanskaya 2-ya, 5/1, 105005 Moscow, Russia
The paper is about researchof mechanical properties of new composite polyurethane. A comparative analysis of the finite element model of the process of forming a thin-sheet product by composite and monolithic working tools is introduced. According to the simulation results, the technological aspects of the use of the composite are given.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.