Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 02006
Number of page(s) 6
Section Agricultural Engineering and Mechanization
DOI https://doi.org/10.1051/e3sconf/202341302006
Published online 11 August 2023
  1. M. F. Bukhina, Technical physics of elastomers, Moscow, Chemistry, 224 (1984) [Google Scholar]
  2. A. Y. Muyzemnek, Description of the behavior of materials in automated engineering analysis systems, Penza, PSU Information Publishing Center, 320 (2005) [Google Scholar]
  3. I. E. Semenov, S. N. Ryzhenko, M. V. Krutova, Modeling the process of deformation of a strip by an elastic and rigid working tool Steel., 5, 83-87 (2007) [Google Scholar]
  4. I. E. Semenov, S. N. Ryzhenko, S. V. Povorov, Dynamic modeling of the process of local bending-molding for the production technology of roof coatings.Procurement in engineering, 10, 40-43 (2007) [Google Scholar]
  5. I. E. Semenov, S. N. Ryzhenko, S. V. Povorov, Investigation of the stress-strain state of an elastic working tool and sheet blank in the process of local bending-molding.Proceedings of the Seventh Conference of CAD Software Users–FEM GmbH, Moscow, Polygon press, 350-354 (2007) [Google Scholar]
  6. I. E. Semenov, D. V. Savchuk, Increasing the rigidity of an elastic working tool for processing thin sheet metal by creating composite material based on polyurethane elastomers and synthetic aramide fabrics. Wschodnioeuropejskie Czasopismo Naukowe (East European Scientific Journal), 12(64), 33-41 (2020) [Google Scholar]
  7. I. E. Semenov, S. N. Ryzhenko, S. V. Povorov, Modeling the molding process on a roll forming mill with an elastic working tool. Vestnik MSTU., 4(79), 86-93 (2010) [Google Scholar]
  8. I. E. Semenov, S. V. Povorov, Simulation of thin-sheet metal blanking and punching by elastic mediums IOP Conference Series: Materials Science and Engineering, 537(3), 032027 (2019) [CrossRef] [Google Scholar]
  9. I. E. Semenov, S. N. Ryzhenko, S. V. Povorov, Modeling of the processes of sequential molding of longitudinal channels in a sheet on a mill with an elastic and rigid tool. Blanking production in mechanical engineering, 6, 29-32 (2010) [Google Scholar]
  10. D. A. Ikonnikov, I. E. Semenov, Thn sheet metal forming with composite material, IOP Conference Series: Materials Science and Engineering, 734(1), 012070 (2020) https: iopscine.iop.or…57-89X/734/1/012070. DOI:10.1088/1757-899X/734/1/012070 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.