Open Access
Issue
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
Article Number 04018
Number of page(s) 11
Section Green Chemistry and Sustainable Technologies
DOI https://doi.org/10.1051/e3sconf/202341304018
Published online 11 August 2023
  1. P. A. Vedmid, A. V. Sulinov, Programming of machining in NX CAM, ed. DMK, 297 (2014) [Google Scholar]
  2. V. A. Golikov, A. G. Amosov, S. Čapulis, Parametric decomposition of failure criticality of complex technical systems. Journal of Advanced Research in Dynamical and Control Systems, 12(7), 984-987 (2020) doi:10.5373/JARDCS/V12SP7/20202192 [CrossRef] [Google Scholar]
  3. E. V. Mikhailova, Parametric restrictions on industrial cleanliness of technological equipment in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042063 [Google Scholar]
  4. M. V. Kapitonov, Course-keeping ability of heavy transport units with an arbitrary number of links, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071336 [Google Scholar]
  5. A. V. Azanov, M. V. Azanov, A. G. Amosov, S. V. Khlopkov, A. A. Khodyakov, Study of impact of tribotechnical composition on rubber technical products to assess its applicability in wheeled transport engine, Paper presented at the IOP Conference Series: Materials Science and Engineering, 632(1) (2019) doi:10.1088/1757-899X/632/1/012049 [Google Scholar]
  6. A. V. Azanov, A. G. Amosov, S. V. Khlopkov, A. A. Khodyakov, Effects of tribotechnical composition, engine oil, and iso-octane on samples of elastomers of automobile technology in aviation industry, International Journal of Advanced Trends in Computer Science and Engineering, 8(5), 2236-2239 (2019) doi:10.30534/ijatcse/2019/58852019 [CrossRef] [Google Scholar]
  7. V. A. Novikov, Technology of production and installation of steam and gas turbines, 2nd edition, revised and supplemented. Ekaterinburg (2009) [Google Scholar]
  8. A. G. Amosov, Comparative analysis of requirements for industrial cleanliness in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042033 [Google Scholar]
  9. V. A. Golikov, Classification of indicators of reliability of systems in heavy engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042069 [Google Scholar]
  10. M. V. Kapitonov, Relative slippage during the modulation of interaction of a pneumatic tire with a bearing surface, Paper presented at the Transportation Research Procedia, 61, 561-566 (2022) doi:10.1016/j.trpro.2022.01.091 [CrossRef] [Google Scholar]
  11. C. A. Petrov, G. V. Karas, S. V. Mozgovoy, A. Y. Kachan, Determination of Cutting Tool Trajectory for Five-coordinate high-stop Machining of Aircraft GTD Blades and Monoblock Wheels on CNC Machines, Vestnik Dvigatelestroyeniya 4, 006 [Google Scholar]
  12. M.O. Kaptakov, Effect of Ultrasonic Treatment on Stability of TiO2 Aqueous Dispersions in Presence of Water-Soluble Polymers, International Journal of Pharmaceutical Research, 12(2), 1821-1824 (2020) [Google Scholar]
  13. A. G. Amosov, Curvilinear trajectory of track machines, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071513 [Google Scholar]
  14. V. A. Golikov, E. E. Vlasova, Computational analysis and decomposition of the “Vehicle-terrain” system for off-road areas, Paper presented at the Transportation Research Procedia, 61, 213-218 (2022) doi:10.1016/j.trpro.2022.01.035 [CrossRef] [Google Scholar]
  15. G. Khotina, E. Churakova, Automation methodology of the surface creation of products thin-walled shell, Paper presented at the Journal of Physics: Conference Series, 1889(2) (2021) doi:10.1088/1742-6596/1889/2/022113 [Google Scholar]
  16. T. I. Mirolyubova, A. G. Amosov, Review of methods for calculating the cross-country ability of heavy road trains in off-road conditions, Paper presented at the Transportation Research Procedia, 61, 206-212 (2022) doi:10.1016/j.trpro.2022.01.034 [CrossRef] [Google Scholar]
  17. A. Vokhidov, E. Churakova, Problems of ensuring the operation of load units of irrigation stations and large mechanical units, Journal of the Balkan Tribological Association, 27(5), 838-847 (2021) [Google Scholar]
  18. A. N. Tarasova, Vibration-based Method for Mechanochemical Coating Metallic Surfaces, International Journal of Pharmaceutical Research, 12(2), 1160-1168 (2020) [Google Scholar]
  19. A. G. Amosov, Classification indicators of maintainability of technical systems, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071519 [Google Scholar]
  20. D. A. Guzeyev, G. V. Sokolov, A. N. Zhidyaev, Development of a methodology to improve the accuracy of milling, Samara National Research University named after Academician S.P. Korolev (2019) [Google Scholar]
  21. V. A. Golikov, Maintainability of individual assembly units in mechanical engineering, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071634 [Google Scholar]
  22. M. V. Kapitonov, Mathematical model of the kinematics of turning of wheeled construction equipment with real and ideal control systems for steering the wheels of a semi-trailer, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071308 [Google Scholar]
  23. A. N. Tarasova, Effect of Vibration on Physical Properties of Polymeric Latexes, International Journal of Pharmaceutical Research, 12(2), 1173-1180 (2020) [Google Scholar]
  24. A. G. Amosov, Special software application for antenna modelling in mechanical engineering, Paper presented at the Journal of Physics: Conference Series, 1889(4) (2021) doi:10.1088/1742-6596/1889/4/042031 [Google Scholar]
  25. V. V. Kalinin, I. V. Petrova, Mathematics in oil and gas education. Theory and tasks: Textbook. - Moscow: Gubkin Russian State University of Oil and Gas, Multiples, curvilinear and surface integrals, Moscow, 3(2), 173 (2005) [Google Scholar]
  26. M. V. Kapitonov, Evaluation and analysis of risks in automotive industry, Paper presented at the Transportation Research Procedia, 61, 556-560 (2022) doi:10.1016/j.trpro.2022.01.090 [CrossRef] [Google Scholar]
  27. A. G. Amosov, V. A. Golikov, M. V. Kapitonov, F. V. Vasilyev, O. K. Rozhdestvensky, Engineering and analytical method for estimating the parametric reliability of products by a low number of tests. Inventions, 7(1) (2022) doi:10.3390/inventions7010024 [CrossRef] [Google Scholar]
  28. I. M. Mogilny, Technical Drawing, Moscow, Izd-vo Mashinostroenie, 313 (2018) [Google Scholar]
  29. M. I. Rynkovskaya, To the question of strength calculation of thin linear helical shells, RUDN, Journal "Building Mechanics of Engineering Structures and Structures", 6 (2015) [Google Scholar]
  30. V. A. Golikov, Method for analytical evaluation and control of technical state of engineering products, Paper presented at the AIP Conference Proceedings, 2467 (2022) doi:10.1063/5.0092789 [Google Scholar]
  31. A. L. Kheifets, Descriptive geometry and computer geometric modelling: textbook, Chelyabinsk: SUSU Publishing Centre, 89 (2013) [Google Scholar]
  32. M. O. Kaptakov, Synthesis and Characterization of Polymer Composite Materials Based on Polyethylene and CuO Nanoparticles, AIP Conference Proceedings, 2402, 020027 (2021) [CrossRef] [Google Scholar]
  33. A. N. Tarasova, Effect of Reagent Concentrations on Equilibria in Water-Soluble Complexes, International Journal of Pharmaceutical Research, 12(2), 1169-1172 (2020) [Google Scholar]
  34. A. G. Amosov, Comparative analysis of materials of loading devices of machine building, Paper presented at the AIP Conference Proceedings, 2467 (2022) doi:10.1063/5.0092787 [Google Scholar]
  35. E. V. Mikhailova, Determination of test reliability using parametric models, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071632 [Google Scholar]
  36. V. A. Golikov, E. U. Churakova, E. V. Mikhailova, G. A. Dvurechensky, Analysis of the characteristics of booster rockets drop zones, Paper presented at the AIP Conference Proceedings, 2402 (2021) doi:10.1063/5.0071518 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.