| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 06007 | |
| Number of page(s) | 8 | |
| Section | Environment Protection Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202341306007 | |
| Published online | 11 August 2023 | |
Mathematical description of birch bark impregnation and heating process of birch bark with toluene
Kazan National Research Technological University, Kazan, ul. Karl Marx, 68, 420015, Russia
* Corresponding author: sfornvi@gmail.com
On the basis of differential equations of heat and mass conductivity and given boundary conditions the mathematical model describing the process of heating and birch bark impregnation with an extractant was developed. Experimental facilities for impregnation and determination of mass conductivity coefficient are created. Kinetic dependence of average concentration of toluene in birch bark during impregnation is obtained. The temperature dependence of toluene mass conductivity coefficient through birch bark was obtained on the setup for determination of mass conductivity. The analysis of kinetic curves of birch bark impregnation with toluene at different temperatures shows a considerable influence of temperature on the impregnation rate. The discrepancy between the calculated and experimental data does not exceed 13%. The rational temperature of impregnation, which is 110 °С, has been determined. Optimum time of birch bark impregnation -10 minutes -has been determined. Developed mathematical model of the process of impregnation and heating of wood particles can be applied to organization of calculations of the process of extraction of biologically active substances from vegetable raw materials.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.