Issue |
E3S Web Conf.
Volume 417, 2023
III International Conference on Geotechnology, Mining and Rational Use of Natural Resources (GEOTECH-2023)
|
|
---|---|---|
Article Number | 03007 | |
Number of page(s) | 8 | |
Section | Energy Saving and Energy Efficiency of Mining Enterprises, Other Industries and Transport Infrastructure | |
DOI | https://doi.org/10.1051/e3sconf/202341703007 | |
Published online | 21 August 2023 |
Controlling power of short circuited induction motor via modern sensors without speed change
Navoi State University of Mining and Technologies, Navoi, Uzbekistan
* Corresponding author: feruz.raximov.2017@mail.ru
Short-circuited rotor induction motors are the most common and largest power consumers in industry. Therefore, it is necessary to find ways to ensure optimal performance of this type of motors and reduce their energy consumption. By this work, we will have the opportunity to automatically control the power of motors used in processes that do not have a stable operating mode. To perform this experiment, we use modern sensors and make special changes to the stator coil. Through our work, we create a special induction motor that is efficient, energy-saving and has a long service life. However it should be kept in mind that our developed motor is distinguished by its slightly complicated construction.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.