Issue |
E3S Web Conf.
Volume 437, 2023
The 5th International Conference on Green Environmental Engineering and Technology (IConGEET2023)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 9 | |
Section | Environmental Sustainability and Development | |
DOI | https://doi.org/10.1051/e3sconf/202343703001 | |
Published online | 16 October 2023 |
Optimization of Biochar Production from Spent Activated Carbon for Anaerobic Biodegradation Enhancement
Department of Environmental Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200, Thailand.
* Corresponding author: patiroop@eng.cmu.ac.th
In this study, effects of temperatures (117-683°C) and heating rates (1.9-23.1 °C/min) on pH and specific surface area (SSA) of biochar produced from the pyrolysis of spent activated carbon (SAC) were investigated. Experiments were designed based on the Central Composite Design (CCD) technique. Results showed that the highest pH and SSA of 11.24 and 998 m2/g were obtained under the temperature and heating rate of 683°C and 12.5 °C/min, respectively. These pH and SSA values were found to be 28% and 18% higher than those of the unprocessed SAC. The pH and SSA values achieved were found to be in the same range as those capable of increasing biogas production from different feedstocks in the literature.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.