| Issue |
E3S Web Conf.
Volume 445, 2023
The 4th International Conference on Green Civil and Environmental Engineering (GCEE 2023)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202344501018 | |
| Published online | 14 November 2023 | |
Characteristics of Plastic Block Wall Materials (PBWM) Using Waste Engine Oil, Crackle Plastic, Mineral Water Plastic Cups Cover and Label of Plastic Bottle Without and With Rice Husk Ash and Natural Aggregates Filling Materials
Civil Engineering Study Program, Udayana University, Jalan Kampus Bukit Jimbaran, Badung, Bali, Indonesia
* Corresponding author: aryathanaya@unud.ac.id
The increase of waste in Indonesia has reached 38 million tons per year and about 30% of this waste are plastic. One of the efforts is to overcome this issue is by using thin plastic waste from packaging which is rarely recycled to become plastic blocks wall material (PBWM), where the plastic was melted in hot waste engine oil (WEO). The main purpose of this study was to analyze the characteristics of the PBWM. Variation of material proportion was based on trials. The plastic waste was initially shredded to sizes about 5-10mm. On sample productions, the WEO was heated to 200°C then the shredded plastic gradually added and evenly mixed, and poured into a metal mould. The mixture was cooled down to ideal temperature for compaction of 110°C to 125°C, then left to reach room temperature. It was obtained that the Initial Rate of Suction (IRS) test results range from 0.0982-0.1012 kg/ 2.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.