Issue |
E3S Web Conf.
Volume 500, 2024
The 1st International Conference on Environment, Green Technology, and Digital Society (INTERCONNECTS 2023)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 7 | |
Section | Earth and Environmental Science | |
DOI | https://doi.org/10.1051/e3sconf/202450002011 | |
Published online | 11 March 2024 |
The Effect of 0.8% Polyethylene Terephthalate Plastic Waste Substitution on the Flexural Strength on K-175 Concrete
Department of Civil Engineering, Universitas Balikpapan, Balikpapan, Indonesia
* Corresponding author: andi.marini@uniba-bpn.ac.id
The use of plastics in daily life continues to increase in a variety of uses. One of the most commonly used plastic that is difficult to decompose is Polyethylene Terephthalate (PET) plastic. In recent years, such as the construction industry, has been trying to reuse the waste as construction material. Therefore, this research aims to contribute by exploring the effect of PET plastic fiber substitution as fine aggregate on the flexural strength of concrete. PET plastic fibers were used at 0.8% as partial replacement of fine aggregates and then chopped to a size of 5 cm long, 1-3 mm wide. The test results indicate that concrete containing 0.8% PET plastic fiber as a substitution of fine aggregate has a higher flexural strength value of 4.32% which is better than normal concrete. Therefore, using recycled PET fiber in concrete is needed as an eco-friendly and sustainable construction material in the future in order to minimize PET plastic waste and replace it as a concrete constituent material.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.