| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 02029 | |
| Number of page(s) | 6 | |
| Section | Material Physics and Chemistry, Carbon Footprint of Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202345802029 | |
| Published online | 07 December 2023 | |
Finishing of aluminium alloy flat products
Moscow State Technological University «STANKIN», Moscow, Russia
* Corresponding author: leonidov78.54@mail.ru
The possibility of improving the surface quality of flat products made of aluminium alloy AMc is considered by using the method of magnetic abrasive processing in the finishing stage of manufacturing. The influence of the main technological parameters of magnetic-abrasive processing, temperature factors and the composition of the cooling lubricant on the quality of the processed surface has been investigated. The results obtained from experimental studies have shown significant improvements in surface quality, which allow us to conclude on the effectiveness of the magnetic abrasive blasting method for finishing products made of the AMc aluminium alloy.
Key words: Finishing / aluminium alloys / surface roughness / oxide film / flat surface quality
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.