| Issue |
E3S Web Conf.
Volume 587, 2024
International Scientific Conference on Green Energy (GreenEnergy 2024)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 8 | |
| Section | Energy Production, Transmission, Distribution and Storage | |
| DOI | https://doi.org/10.1051/e3sconf/202458701015 | |
| Published online | 07 November 2024 | |
The permissible concentration of abrasive particles in the machine oil
1 Urgench state university, Khorezm Uzbekistan
2 Tashkent State Technical University, Tashkent Uzbekistan
* Corresponding author: bmsanjarm1994@mail.ru
The wear rate of a gear wheel tooth is assessed taking the dust level and the size of abrasive fractions; the geometrical, kinematic, and dynamic parameters that are characteristic of toothed gears; and the mechanical properties of gear wheel materials into account. The article presents the results of research of the reglarity of change of the permissible concentration of abrasive fractions in the oil of machine units depending on the gearing module, gear ratio, tooth length and hardness of the materi al, wear rate of gear teeth of pinion gears working in conditions of high environmental pollution.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.