| Issue |
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
|
|
|---|---|---|
| Article Number | 02029 | |
| Number of page(s) | 7 | |
| Section | Innovative Development of Sustainable Systems of Agrarian-and-Food Production | |
| DOI | https://doi.org/10.1051/e3sconf/202448602029 | |
| Published online | 07 February 2024 | |
Calculation of wear products falling into the oil as a result of gear teeth wear
Technical University 2nd str. University, Tashkent, Uzbekistan
* Corresponding author: gulchehra2767@mail.ru
The article presents an overview of experimental studies of gear tooth wear, which results in the loss of wear products in the oil unit. The results of experimental studies on the wear of the tooth heads of the driving gears and the knives of the driven gear teeth are presented. The results of calculating the wear of the gear train of the unit after operating time are also presented. The coefficient of distribution of wear products between obvious gears according to the period of oil change in the unit has been established. The dependence of the linear wear of the head and leg of the teeth of the drive gear of the unit after 1000 hours of operation on the meshing height coefficient is calculated. An analytical calculation of the linear wear of gear teeth, an increase in the concentration of wear products in the oil of the unit and a decrease with an increase in the total number of gear teeth, tooth length and engagement module were made, and the results of the test work were given.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.