| Issue |
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
|
|
|---|---|---|
| Article Number | 07016 | |
| Number of page(s) | 7 | |
| Section | Fuels, Engines, and Electric Transportation | |
| DOI | https://doi.org/10.1051/e3sconf/202459207016 | |
| Published online | 20 November 2024 | |
Inreasing the engine powers by using brown’s gas
1 Andijan Machine Building Institute, Andijan, Uzbekistan
2 Uzbekistan State World Languages University, Tashkent, Uzbekistan
* Corresponding author: nosirov-ilhom59@mail.ru
Tests of Braun gas obtained from electrolyzers in laboratory and road conditions in various models of «UzAvtomotors» XJ engine installed stands and carried out in cars. According to the results of laboratory tests, a small type of electrolyzer was selected. In field tests, the option of adding 15 % of Brown’s gas released from the internal electrolyzer to the fuel-air mixture was selected. According to the results of the tests, the power of the engine increases by 5.49%, the time for the car to reach 100 km/h decreases by 6.75%, the maximum speed of the car increases by 10.42%, the amount of CO in the exhaust gases is 64.67 decreases by % and the amount of CH in the treated gases decreases by 66.04%. Also, the mileage of the car on the given fuel increases by 1.15-1.18 times, and the life of the engine increases by 1.3-1.4 times due to the automatic removal of carbon soot from the engine.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.