| Issue |
E3S Web Conf.
Volume 598, 2024
2024 9th International Conference on Advances in Energy and Environment Research (ICAEER 2024)
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 4 | |
| Section | Research on Innovations of New Materials and Environmental Protection | |
| DOI | https://doi.org/10.1051/e3sconf/202459801009 | |
| Published online | 27 November 2024 | |
Synthesis and Properties of Amphoteric Etherified Starch Flocculant CMSG
1 Institute of Energy Sources, Hebei Academy of Sciences, Shijiazhuang 050081, China
2 Hebei Guochuang Jingjinji Technology Development Co., Ltd, Shijiazhuang 050081, China
3 Hebei Sunwater Water Treatment Co., Ltd, Shijiazhuang 050081, China
* Corresponding author: 873756647@qq.com
Etherified starch has the advantages of cheap raw materials and simple preparation process. In the field of wastewater treatment, it can be used as a flocculant and adsorbent. Amphoteric etherified starch CMGS was synthesized in a one-step method using cornstarch (St) as raw material, 2,3-epoxypropyl trimethyl ammonium chloride (GTA) and chloroacetic acid (CAA) as cationic and anionic etherification agents, respectively, and the flocculation performance on kaolin suspension was studied. The results showed that compared with cationic etherified starch, the optimal dose of the amphoteric etherified starch CMGS increased and the flocculation window length increased. The optimal dose of CMGS2 was 14 mg/L, and the flocculation window length was 24 mg/L, which has certain practical value.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.