| Issue |
E3S Web Conf.
Volume 486, 2024
IX International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-IX 2023)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 8 | |
| Section | Agritechnologies and Environmental Engineering for Sustainable Environmental Health | |
| DOI | https://doi.org/10.1051/e3sconf/202448601003 | |
| Published online | 07 February 2024 | |
Issues of increasing the economic efficiency of manufacturing enterprises on the impact on the environment
1 Samarkand State University named after Sharof Rashidov, Samarqand, Uzbekistan
2 Samarkand State University of Architecture and Construction named after Ulugbek, Samarqand, Uzbekistan
3 Technical University of Public Health named after Abu Ali Ibn Sina, Kattakurgan, Uzbekistan
4 Tashkent State Technical University named after Islom Karimov, Tashkent, Uzbekistan
* Corresponding author: guli_d@inbox.ru
This article describes issues of reducing the environmental impact of harmful compounds produced by production enterprises in various fields and the introduction of a new type of dust-gas cleaning equipment at the enterprise, which allowed harmful substances to exceed the permissible limits. In addition, analytical work and calculation issues on increasing the economic efficiency of the enterprise were presented.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.