| Issue |
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
|
|
|---|---|---|
| Article Number | 04016 | |
| Number of page(s) | 8 | |
| Section | Engineering for Environment Development Applications | |
| DOI | https://doi.org/10.1051/e3sconf/202449104016 | |
| Published online | 21 February 2024 | |
Effect of Temperature Variation on Al based Composites during T6 Heat Treatment
1 Professor, Department of Civil Engineering, Prince Shri Venkateshwara Padmavathy Engineering College, Chennai - 600 127,
2 Associate Professor,Dept.of Physics,Ramco Institute of Technology, Rajapalayam
3 The Islamic university, Najaf, Iraq. laith.h.alzubaidi@iunajaf.edu.iq
4 Department of Electronics & Communication engineering Uttaranchal Institute of Technology, Uttaranchal University, Dehradun - 248007, India sanjeevkshah19@gmail.com
5 Department of Management,Uttaranchal Institute of Management, Uttaranchal University, Dehradun - 248007, India, Deepabisht.bisht28@gmail.com
Corresponding author: divya.n_civil@psvpec.in
The heat treatment-T6 offers significant benefits for Aluminum Matrix composites due to changes of structure and material properties like strength, hardness and corrosion resistance. In this study, the preparation of reinforced Molybdenum Disulfide With Al-Zn-Mg alloy composites done by stir casting methodology. Three parameters like temperature (A), Time duration (B) and quenching medium (C) are considered for Heat Treatment Process (HTP). Quenching medium, time and temperature are reserved as constant. The main aim is to compare corrosion or wear characteristics (WC) and Hardness (BHN) of prepared samples before and after HTP. POD device used to conduct test of wear rate. 12 experiments are carried out by change of MOS2 particles volume (5-20 w.t %) and Temperature (400-700º C). the experimental outcomes are discussed and compare the mechanical properties for stir-casting and T6-HTP.
Key words: Heat treatment / Al matrix composites / wear Rate
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.