EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 491 (2024) E3S Web Conf., 491 (2024) 04016 References
Open Access
Issue
E3S Web Conf.
Volume 491, 2024
International Conference on Environmental Development Using Computer Science (ICECS’24)
Article Number 04016
Number of page(s) 8
Section Engineering for Environment Development Applications
DOI https://doi.org/10.1051/e3sconf/202449104016
Published online 21 February 2024
  1. A.A. Rahman, M. S. Salleh, I. S. Othman, S. Subramonian, S. H. Yahaya, and N. Siswanto, “Investigation of Wear and Corrosion Characteristics of Short Heat Treated Thixoformed Aluminium Alloy,” Journal of Advanced Manufacturing Technology 13, no. 3 (2019): 97-108. [Google Scholar]
  2. Gugulothu, B., Nagarajan, N., Pradeep, A., Saravanan, G., Vijayakumar, S., & Rao, J. (2022). “Analysis of mechanical properties for Al-MMC fabricated through an optimized stir casting process”, Journal of Nanomaterials, 2022, 1–7. https://doi.org/10.1155/2022/2081189 [Google Scholar]
  3. Gugulothu, B., Seetharaman, S., Vijayakumar, S., & Jenila Rani, D. (2022). “Process parameter optimization for tensile strength and Hardness of Al-MMC using RSM technique”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.043 [Google Scholar]
  4. Carreno-Morelli, E., Cutard, T., Schaller, R., Bonjour, C., 1998. Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration.Materials Science and Engineering A 252, 48. [Google Scholar]
  5. S.A. Sajjadi, H. Ezatpour, M.T. Parizi, Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes, Mater. Des. 34 (2012) 106–111. [Google Scholar]
  6. H. Hanizam, M. S. Salleh, M.Z. Omar and A.B Sulong, “Effects of Mechanical Stirring and Short Heat Treatment on Thixoformed of Carbon Nanotube Aluminium Alloy Composite,” Journal of Alloys and Compounds 788, (2019): 83–90. [CrossRef] [Google Scholar]
  7. F. Akhlaghi, A. Lajevardi, H. Maghanaki, Effects of casting temperature on the microstructure and wear resistance of compocast A356/SiCp composites: a comparison between SS and SL routes, J. Mater. Process. Technol. 155 (2004) 1874–1880. [CrossRef] [Google Scholar]
  8. H. Möller, G. Govender and W.E. Stumpf, “Investigation of the T4 and T6 Heat Treatment Cycles of Semi-Solid Processed Aluminium Alloy A356,” The Open Materials Science Journal 2, no. 1 (2008): 11-18. [CrossRef] [Google Scholar]
  9. Liu G, Wang Q, Liu T, Ye B, Jiang H and Ding W 2017 Effect of T6 heat treatment on microstructure and mechanical property of 6101/A356 bimetal fabricated by squeeze casting Material Science & Engineering A 696 208-215 [CrossRef] [Google Scholar]
  10. Shital Thakare, S. C. Makwana, ‘‘Optimization of heat treatment process for internal clutch by using Taguchi Technique”, International Journal of Engineering Research and applications,January 2014, Vol 4, Issue 1, p.p 144-151. [Google Scholar]
  11. S.D. Vetrivel, S. Dhanabal, M. Vimal Raja, Heat treatment of medium carbon steel and evaluation of micro hardness and wear resistance for automotive applications, International Journal of Modern Engineering Research Vol. 5, Iss.12 (December 2015). [Google Scholar]
  12. M. Sakthivel, A.G.G. Kumar, P. Raja, M. Muthuvel, Evaluation of EN8 Steel in Different Quenching Medium, International Journal of Engineering Science and Research 4 (September 2013), art.09297 [Google Scholar]
  13. Ramamoorthi, R., Justin Maria Hillary, J., Sundaramoorthy, R., Dixon Jim Joseph, J., Kalidas, K., & Manickaraj, K. (2021). Influence of stir casting route process parameters in fabrication of aluminium matrix composites – A review. Materials Today: Proceedings, 45, 6660–6664. https://doi.org/10.1016/j.matpr.2020.12.068 [CrossRef] [Google Scholar]
  14. Gugulothu, B., Satheesh Kumar, P. S., Srinivas, B., Ramakrishna, A., & Vijayakumar, S. (2021). “Investigating the material removal rate parameters in ECM for Al 5086 alloy-reinforced silicon carbide/flyash hybrid composites by using Minitab-18”, Advances in Materials Science and Engineering, 2021, 1–6. https://doi.org/10.1155/2021/2079811 [Google Scholar]
  15. Gugulothu, B., Satheesh Kumar, P. S., Srinivas, B., Ramakrishna, A., & Vijayakumar, S. (2021). “Investigating the material removal rate parameters in ECM for Al 5086 alloy-reinforced silicon carbide/flyash hybrid composites by using Minitab-18”, Advances in Materials Science and Engineering, 2021, 1–6. https://doi.org/10.1155/2021/2079811 [Google Scholar]
  16. Gugulothu, B., Seetharaman, S., Vijayakumar, S., & Jenila Rani, D. (2022). “Process parameter optimization for tensile strength and Hardness of Al-MMC using RSM technique”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.03.043 [Google Scholar]
  17. Pal, D., Vijayakumar, S., Rao, T. V. J., & Babu, R. S. R. (2022). “An examination of the tensile strength, hardness and SEM analysis of Al 5456 alloy by addition of different percentage of SiC/flyash”,Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.02.288 [Google Scholar]
  18. Paramasivam, P., & Vijayakumar, S. (2021). “Mechanical characterization of aluminium alloy 6063 using destructive and non-destructive testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2021.04.312 [Google Scholar]
  19. Vijayakumar, S., Dhasarathan, N., Devabalan, P., & Jehan, C. (2019). “Advancement and design of robotic manipulator control structures on cyber physical production system”,Journal of Computational and Theoretical Nanoscience, 16(2), 659–663. https://doi.org/10.1166/jctn.2019.7786 [CrossRef] [Google Scholar]
  20. Prakash Pasupulla, A., Abebe Agisho, H., Seetharaman, S., & Vijayakumar, S. (2022). “Characterization and analysis of TIG welded stainless steel 304 alloy plates using radiography and destructive testing techniques”, Materials Today: Proceedings, 51, 935–938. https://doi.org/10.1016/j.matpr.2021.06.305 [Google Scholar]
  21. Pydi, H. P., Pasupulla, A. P., Vijayakumar, S., & Agisho, H. A. (2022). “Study on microstructure, behavior and Al₂O3 content flux A-TIG weldment of SS-316L steel”, Materials Today: Proceedings, 51, 728–734. https://doi.org/10.1016/j.matpr.2021.06.218 [Google Scholar]
  22. Pydi, H. P., Pradeep, A., Vijayakumar, S., & Srinivasan, R. (2022). “Examination of various weld process parameters in MIG welding of carbon steel on weld quality using radiography & magnetic particle testing”, Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.01.160. [Google Scholar]
  23. Vijayaraja L., Gokulnath B., Sai Ganapathy S., Dhanasekar R., Kesavan R., (2018),”Modified SEPIC converter based PV Inverter for Power Quality Improvement”,7th IEEE International Conference on Computation of Power, Energy, Information and Communication, ICCPEIC 2018, Vol.2018-January,pp.285 [Google Scholar]
  24. Surulivel Rajan T., N.B G., Rajkumar S., (2022),”Parametric analysis of thermal behavior of the building with phase change materials for passive cooling”,Energy Sources, Part A: Recovery, Utilization and Environmental Effects,Vol.44,no.3,pp.5639. [Google Scholar]
  25. Ms. Mayuri Ingole. (2015). Modified Low Power Binary to Excess Code Converter. International Journal of New Practices in Management and Engineering, 4(03), 06 –10. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/38 [CrossRef] [Google Scholar]
  26. Prof. Nikhil Surkar. (2015). Design and Analysis of Optimized Fin-FETs. International Journal of New Practices in Management and Engineering, 4(04), 01 –06. Retrieved from http://ijnpme.org/index.php/IJNPME/article/view/39 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.