| Issue |
E3S Web Conf.
Volume 497, 2024
5th International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2024)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 6 | |
| Section | Civil Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202449702005 | |
| Published online | 07 March 2024 | |
Study on modeling roller squeezing semi-finished leather products
1 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
2 Tashkent State University оf Economics, Tashkent, Uzbekistan
* Corresponding author: shavkat-xurramov59@gmail.ru
This study is devoted to the analysis of moisture content in a two-roll module of a machine for squeezing semi-finished leather products after chrome tanning. An analytical relationship was obtained that describes the patterns of variation in moisture content during the roller pressing of semi-finished leather products; inequalities were derived for estimating the residual moisture content of semi-finished leather products. It was revealed that with a decrease in the thickness and initial moisture content of the semi-finished leather product, its moisture content decreases. It was stated that with an increase in the initial moisture content of the semi-finished leather product, its residual moisture content increases and asymptotically approaches a certain value.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.