Issue |
E3S Web Conf.
Volume 498, 2024
III International Conference on Actual Problems of the Energy Complex: Mining, Production, Transmission, Processing and Environmental Protection (ICAPE2024)
|
|
---|---|---|
Article Number | 01013 | |
Number of page(s) | 8 | |
Section | Problems of the Energy Complex | |
DOI | https://doi.org/10.1051/e3sconf/202449801013 | |
Published online | 06 March 2024 |
CFD analysis for absorber tube of a solar water heater collector
Karshi Engineering Economics Institute, Karshi, 180100, Uzbekistan
* Corresponding author: bobur160189@mail.ru
In this work, CFD analysis of smooth absorber fin tube and screw absorber fin tube used in solar water heater collector is considered and compared. Three-dimensional numerical CFD model simulations were performed using flow simulation in COMSOL Multiphysics software. A flat absorber wing tube made of different materials (Stainless steel, Iron, Copper, Aluminum) is evaluated. At the same time, different water inlet velocities were tested. Various velocities such as 0.01 m/s, 0.02 m/s, 0.025 m/s, 0.035 m/s have been simulated and here the inlet velocity of 0.2 m/s is close to optimal for the given size, the outlet velocity at this velocity is suitable for direct consumption.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.