Issue |
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
|
|
---|---|---|
Article Number | 01009 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202450701009 | |
Published online | 29 March 2024 |
A Comparison of the Effects of Different Slopes on Building Reaction in Wind Zones
1 Department of Mechanical Engineering, ABES Engineering College, Ghaziabad - 201009, UP, India
2 Institute of Aeronautical Engineering, Dundigal, Hyderabad
3 Department of Applied Sciences, New Horizon College of Engineering, Bangalore
4 Department of Mechanical Engineering, Nagpur Institute of Technology, Nagpur, India
5 Lloyd Institute of Engineering & Technology, Knowledge Park II, Greater Noida, Uttar Pradesh 201306
6 Lloyd Institute of Management and Technology, Greater Noida, Uttar Pradesh, India - 201306
7 The Islamic university, Najaf, Iraq
* Corresponding author: modi_himabindu@iare.ac.in
Understanding and analysing wind-induced vibrations is a crucial part of the overall evaluation, design, and construction of high-rise building structures. Developers are exploring and using sloped or steep terrain for construction due to the ongoing trends of urbanisation, the ongoing demand for housing, and the constraints placed on available land resources. This change in the landscape underscores the necessity for considerable research endeavours by requiring a comprehensive grasp of the structural equilibrium of structures positioned on slopes. To investigate how wind speed affects the way building frames respond structurally when situated on sloping terrain is the principal objective of this research project. The study considers alternative frame geometries in combination with varying ground slopes. By highlighting the Taking into account wind loads—especially in different wind zones (like III and IV)—and different slopes— from 0° to 10°—the study seeks to clarify the complex dynamics at play in the relationship between wind forces and multi storey reinforced concrete building frames. As a consequence, it is essential to determine if a hillside can sustain building loads. In order to estimate the factor of safety against the slope’s sliding collapse, this study proposes a method that takes building loads transferred to the slope into account. Wind forces might also be included in the analysis. It is feasible to consider various slopes similar to the formulation provided in the research. Research on the stability of slopes with different building configurations has been conducted. This research has discussed the measures that must be implemented for stepped foundations on hill slopes.
Key words: Tall building / Wind Load / Displacement / Bending Moment / Shear Force / Slopy Ground
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.