Open Access
Issue
E3S Web of Conf.
Volume 507, 2024
International Conference on Futuristic Trends in Engineering, Science & Technology (ICFTEST-2024)
Article Number 01009
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202450701009
Published online 29 March 2024
  1. Dulganti, Dheeraj Reddy, and Pallavi Badry. “Literature Review on Interaction Analysis of Building Resting on Sloping Ground.” [Google Scholar]
  2. Navale, Ravindra, Dr Sandeep Hake, and Pramod Kharmale. “Analysis of unsymmetrical building resting on sloping ground by dividing in 2d frame.” International Research Journal of Engineering and Technology (IRJET) 4.7 (2017): 943–947. [Google Scholar]
  3. Patel, Krishna, Swati Agrawal, and Akshit Lamba. “Study of Sloped Structure in Hilly Terrain.” [Google Scholar]
  4. Irfan, Abu Zafar Mohammed, and Vishwanath B. Patil. “Review On Seismic Analysis Of Multistoried Building On Sloping Ground.” (2018). [Google Scholar]
  5. Sivapriya, S. V., and S. R. Gandhi. “Soil–structure interaction of pile in a sloping ground under different loading conditions.” Geotechnical and Geological Engineering 38 (2020): 1185–1194. [Google Scholar]
  6. Iancovici, Mihail, et al. “Nonlinear dynamic response analysis of buildings for wind loads. A new frontier in the structural wind engineering.” Journal of Building Engineering 47 (2022): 103708. [Google Scholar]
  7. Dagnew, Agerneh, and Girma T. Bitsuamlak. “Computational evaluation of wind loads on buildings: a review.” Wind Struct 16.6 (2013): 629–660. [Google Scholar]
  8. Parashar, Arun Kumar, Ajay Kumar, K. Anand Goud, Nakul Gupta, Kuldeep Kumar Saxena, Amjad Iqbal, Faramarz Djavanroodi, and S. Saadaoui. “An approach for environment protection by regression and cluster analysis of GGBSbased geopolymer composite at different proportion of brick dust.” Mechanics of Advanced Materials and Structures (2023) [Google Scholar]
  9. Khanduri, A. C., Stathopoulos, T., & Bédard, C. (1998). Wind-induced interference effects on buildings—a review of the state-of-the-art. Engineering structures, 20(7), 617–630. [Google Scholar]
  10. Sharma, R., Anand, A., & Kumar, A. (2022). Comparative Study on the Effect of Slopes on a Building in Different Seismic Zones. [Google Scholar]
  11. Kwon, Dae-Kun, Tracy Kijewski-Correa, and Ahsan Kareem. “E-analysis of high-rise buildings subjected to wind loads.” Journal of Structural Engineering 134.7 (2008): 1139–1153. [Google Scholar]
  12. Mendis, P., Ngo, T., Haritos, N., Hira, A., Samali, B., & Cheung, J. (2007). Wind loading on tall buildings. Electronic Journal of Structural Engineering. [Google Scholar]
  13. Dwivedi, Shashi Prakash, S. Selvaprakash, Shubham Sharma, Soni Kumari, Kuldeep K. Saxena, Rajesh Goyal, Amjad Iqbal, and Faramarz Djavanroodi. “Evaluation of various properties for spent alumina catalyst and Si3N4 reinforced with PET-based polymer composite.” Mechanics of Advanced Materials and Structures (2023). [Google Scholar]
  14. Arya, U., Hussain, A., & Khan, W. (2014). Wind analysis of building frames on sloping ground. International Journal of Scientific and Research Publications, 4(5), 1–7. [Google Scholar]
  15. Longarini, Nicola, et al. “Structural improvements for tall buildings under wind loads: comparative study.” Shock and Vibration 2017 (2017). [Google Scholar]
  16. Faheem, Abdul, Ankit Tyagi, Faisal Hasan, Abid Ali Khan, Qasim Murtaza, and Kuldeep K. Saxena. “Residual stress investigation in the metallic coating approach of micro-sized particles on the substrate: cold spray additive manufacturing.” Advances in Materials and Processing Technologies 8, no. 4 (2022): 4642–4658. [Google Scholar]
  17. Edalati-nejad, A., Ghodrat, M., & Sharples, J. J. (2023). On the interaction of wind, fire intensity and downslope terrain with implications for building standards in wildfire-prone areas. International journal of wildland fire, 32(11), 1619–1632. [Google Scholar]
  18. Manohar, T., Prashantha, S. C., Nagaswarupa, H. P., Naik, R., Nagabhushana, H., Anantharaju, K. S., … & Premkumar, H. B. (2017). White light emitting lanthanum aluminate nanophosphor: near ultra violet excited photoluminescence and photometric characteristics. Journal of Luminescence, 190, 279–288. [Google Scholar]
  19. Guggari, Geetanjali S., B. Bhavani, Manjunath GA, Vinay M. Murgod, L. Vidhya, S. Vinodha, C. Ahamed Saleel, Kuldeep K. Saxena, Faramarz Djavanroodi, and Amjad Iqbal. “Sea water exposure and erosion impact on multifonctionnel ABS-based thermoplastic hybrid composites.” Mechanics of Advanced Materials and Structures (2023) [Google Scholar]
  20. Ellingwood, B. R., Rosowsky, D. V., Li, Y., & Kim, J. H. (2004). Fragility assessment of light-frame wood construction subjected to wind and earthquake hazards. Journal of structural engineering, 130(12), 1921–1930. [Google Scholar]
  21. Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2022, August). Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 815–828). Singapore: Springer Nature Singapore. [Google Scholar]
  22. Ashwini, S., Prashantha, S. C., Naik, R., & Nagabhushana, H. (2019). Enhancement of luminescence intensity and spectroscopic analysis of Eu3+ activated and Li+ charge-compensated Bi2O3 nanophosphors for solid-state lighting. Journal of Rare Earths, 37(4), 356–364. [Google Scholar]
  23. Kumar, C. P., Raghu, M. S., Prathibha, B. S., Prashanth, M. K., Kanthimathi, G., Kumar, K. Y., … & Alharthi, F. A. (2021). Discovery of a novel series of substituted quinolines acting as anticancer agents and selective EGFR blocker: Molecular docking study. Bioorganic & Medicinal Chemistry Letters, 44, 128118. [Google Scholar]
  24. Alkorbi, A. S., Kumar, K. Y., Prashanth, M. K., Parashuram, L., Abate, A., Alharti, F. A., … & Raghu, M. S. (2022). Samarium vanadate affixed sulfur self doped g-C3N4 heterojunction; photocatalytic, photoelectrocatalytic hydrogen evolution and dye degradation. International Journal of Hydrogen Energy, 47(26), 12988–13003. [Google Scholar]
  25. Singh, P., Singh, A. K., Arun, V., & Tripathi, D. K. (2024). Comparative study of all-optical INVERTER and BUFFER gates using MZI structure. Journal of Optical Communications, 44(s1), s253–s261. [Google Scholar]
  26. Thakur, Ashish, Din Bandhu, D. R. Peshwe, Y. Y. Mahajan, Kuldeep K. Saxena, and Sayed M. Eldin. “Appearance of reinforcement, interfacial product, heterogeneous nucleant and grain refiner of MgAl2O4 in aluminium metal matrix composites.” Journal of Materials Research and Technology (2023). [Google Scholar]
  27. Srinivasan, K., Porkumaran, K., & Sainarayanan, G. (2009, August). Improved background subtraction techniques for security in video applications. In 2009 3rd International Conference on Anti-counterfeiting, Security, and Identification in Communication (pp. 114–117). IEEE. [Google Scholar]
  28. Swarna, K. S. V., Vinayagam, A., Ananth, M. B. J., Kumar, P. V., Veerasamy, V., & Radhakrishnan, P. (2022). A KNN based random subspace ensemble classifier for detection and discrimination of high impedance fault in PV integrated power network. Measurement, 187, 110333. [Google Scholar]
  29. Trivedi, V., & Pahwa, S. (2018). Wind Analysis of Multistory Building: A Review. [Google Scholar]
  30. Hunt, J. C. R., Poulton, E. C., & Mumford, J. C. (1976). The effects of wind on people; new criteria based on wind tunnel experiments. Building and Environment, 11(1), 15–28. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.