| Issue |
E3S Web Conf.
Volume 515, 2024
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2024) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
|---|---|---|
| Article Number | 04011 | |
| Number of page(s) | 7 | |
| Section | Mechanical Engineering and New Energy Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202451504011 | |
| Published online | 12 April 2024 | |
Information and diagnostic tools for monitoring units of agricultural machinery
1 Federal Scientific Agro-Engineering Center VIM, 1 Institutsky proezd, 5, Moscow, 109428, Russia
2 Bauman Moscow State Technical University, 2nd Baumanskaya Street, 5, Moscow, 105005, Russia
3 Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Timiryazevskaya str., 49, 127434, Moscow, Russia
* Corresponding author: redizdat@mail.ru
The issues of assessing the increase in the efficiency of domestic agricultural machinery according to the criteria of suitability for maintenance and diagnostics and the development of measures to improve it are relevant, as they have a significant impact on the reliability and total cost of ownership and resource of saving during operation. It should be noted that not only the costs of maintenance and repair, but also the time spent in an inoperative state, technical readiness, productivity and other indicators of the efficiency of use for its intended purpose, including resource-saving impacts, depend on the level of equipment adaptability. The purpose of the research was to describe the state of the issue and justify the need to develop information and diagnostic tools for assessing the general technical condition of energy-intensive tractors. The analysis and description of the developed tools for diagnosing agricultural machinery have been done in the work. Similar control and diagnostic equipment produced by third-party manufacturers for agricultural machinery was considered. The distinctive features of our own developments were determined and the need to diagnose specific parameters was also reflected. As a result of the work 3D modeling of the device data was carried out. Then they were designed in special software and the first prototypes were assembled. The tests have proven the possibility of developing such digital diagnostic of device. The data obtained on the base of their effectiveness was reflected and justified. A number of improvements to these systems have been proposed. The results of the operation of all information and diagnostic devices were summed up. Further development of this area of work has been proposed for more modern and high-quality maintenance of units and assemblies of agricultural machinery.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.