| Issue |
E3S Web of Conf.
Volume 517, 2024
The 10th International Conference on Engineering, Technology, and Industrial Application (ICETIA 2023)
|
|
|---|---|---|
| Article Number | 14004 | |
| Number of page(s) | 7 | |
| Section | Circular Industrial Systems | |
| DOI | https://doi.org/10.1051/e3sconf/202451714004 | |
| Published online | 15 April 2024 | |
Analysis of Eco-Efficiency Level in Tofu Processing Using the Life Cycle Assessment (LCA) Method
Department of Industrial Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta, Indonesia
* Corresponding author: aaf550@ums.ac.id
A tofu industrial center in Sukoharjo Regency, Central Java requires approximately 700 kg of soybeans per day. There is some waste in tofu processing, including energy consumption, water consumption, and has a negative impact on the environment in the form of liquid waste and solid waste. This study aims to analyze and provide suggestions for improvements regarding the level of eco-efficiency in tofu processing. The method used is Life Cycle Assessment (LCA) using SimaPro software with the scope of "gate to gate". This research resulted in an eco-cost value of IDR 2,005,000 and an EEI value of 0.13 which means that it is affordable but not sustainable. Then obtained an EVR value of 7.5 and an EER rate of -6.5%, which means that the eco-efficiency of tofu products is quite poor. So that the proposed improvements that can be used are minimizing the use of raw materials, water and energy and treating waste from tofu processing according to the predetermined booklet.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.