Issue |
E3S Web Conf.
Volume 520, 2024
4th International Conference on Environment Resources and Energy Engineering (ICEREE 2024)
|
|
---|---|---|
Article Number | 02008 | |
Number of page(s) | 7 | |
Section | Carbon Emission Control and Waste Resource Utilization | |
DOI | https://doi.org/10.1051/e3sconf/202452002008 | |
Published online | 03 May 2024 |
Using the overall variation trend and fitting of Na-feldspar crystal plane spacing after chemical corrosion to prevent rock disasters
School of Energy and Mechanical Engineering, Jiangxi University of Science and Technology, Nanchang 330013, Jiangxi, China
* Corresponding author’s email: xuejinchun@jxust.edu.cn
Sulfuric acid pollution, caused by acid rain, acidic wastewater, and natural acidic wastewater from mines, poses a significant risk to the stability of natural stone slopes and human stone structures. This study aims to develop a non-mechanical testing method for assessing the degree of acid corrosion in rocks, facilitating early intervention by safety engineers. The proposed method involves using XRD to measure the crystal plane spacing of Na-feldspar corroded by different concentrations of sulfuric acid, followed by mathematical analysis to determine the overall deviation degree of the crystal plane spacing. Four Deviation indices were defined to characterize the degree of acid corrosion, and all four indices increased with increasing acidity. By comparing trend charts, an optimized number of crystal planes for analysis was identified. Selecting the 100 sets of data with the largest spacing yielded similar trend results as selecting all the data. In addition, five different fitting methods were compared, and the power function fitting of Weighted Sum of squares of cumulative errors (WSSCE) was found to provide the optimal empirical formula, with a correlation coefficient exceeding 0.98.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.