| Issue |
E3S Web of Conf.
Volume 537, 2024
International Scientific and Practical Conference “Sustainable Development of the Environment and Agriculture: Green and Environmental Technologies” (SDEA 2024)
|
|
|---|---|---|
| Article Number | 08017 | |
| Number of page(s) | 7 | |
| Section | Digital and Engineering Technologies as a Factor in the Intensive Development of Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202453708017 | |
| Published online | 13 June 2024 | |
Modelling Cotton Fiber Doffing From Saw Teeth Based On A Mathematical Model
1 Department of Textile Fibers Engineering, Namangan Institute of Textile Industry, Uzbeksitan, Namangan, 160605
2 Department of Automation and Control of Technological Processes, Namangan Institute of Engineering and Technology, Uzbeksitan, Namangan, 160115
* Corresponding author: yoldashev93992020@mail.ru
In recent years, there have been many researches devoted to the theoretical foundations of the sawing process. However, among them, there are none devoted to the study of the process of extracting the fiber separated from the seed from the saw teeth. From this point of view and based on the existing problems of fiber removal in saw teeth, this research aims to fill this gap and analyze the problems related to this topic.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.