Beneficiation Processing of Magnetite ore from Lampung as Dense Media for Dense Medium Separator in Coal Washing Plant

Department of Metallurgical Engineering, Bandung Institute of Technology

E-mail: ismie@mining.itb.ac.id

Abstract

Until recently, coal washing plants in Indonesia are still using imported magnetite from Australia as dense media for dense medium separator units. To be effectively utilized as a dense media, magnetite ore needs to be concentrated to remove gangue minerals so that the final product will have more than 95% magnetic content, 95% weight passing 53 microns, and relative density ranging from 4.9 – 5.2 g/cm³. Experimental studies have been performed at the Department of Metallurgical Engineering ITB to concentrate fine magnetite ores from Lampung Province. Two process routes were chosen: grinding-magnetic separation and magnetic separation-grinding. Products from the two routes were sieve size analyzed, assayed and characterized. Magnetism characteristic was analyzed with VSM and relative density was measured with pycnometer. The first process route products have maximum magnetic content of 99.1% and particle weight passing 53 microns of 95.7%, while the second route have magnetic content of 95.2% and particle passing 53 microns of 97.1%. Concentrates from both routes have the same relative density of 4.5 g/cm3. Characterization by XRF and AAS gives Fe content of 46.6% and 48.8% for the first route product, and 52.1% and 52.9% for the second route. Lampung magnetite ore gives lower magnetism characteristic compare to Australian magnetite ore. Finer particle size gave lower magnetic saturation value, hence lower magnetism.