Issue |
E3S Web Conf.
Volume 642, 2025
5th European Conference on Unsaturated Soils and Biotechnology applied to Geotechnical Engineering (EUNSAT2025 + BGE)
|
|
---|---|---|
Article Number | 03014 | |
Number of page(s) | 5 | |
Section | EUNSAT2025 - Experimental Evidence and Techniques | |
DOI | https://doi.org/10.1051/e3sconf/202564203014 | |
Published online | 14 August 2025 |
Correlations between water-entry value and its affecting factors for hydrophobic soil: A review
Guizhou University, College of Resources and Environmental Engineering, Key Laboratory of Karst Georesources and Environment, Ministry of Education, Guiyang 550025, China
* Corresponding author: zhouz@gzu.edu.cn
Hydrophobic soil has been proposed to be adopted as an infiltration barrier for geostructures because a water-entry value needs to be reached to wet hydrophobic soil. The Washburn equation was initially proposed to estimate the capillary height of hydrophilic soil (contact angles lower than 90 degrees), thus it is doubtful that whether one can use it for hydrophobic soil (contact angles larger than 90 degrees) without modification. Current studies show poor estimations of water-entry value by adopting the Washburn equation. This paper aims to conduct a review on the affecting factors of water-entry value for hydrophobic soil. Data from the literature are collected, reinterpreted and analysed with reference to existing theories. At the end of this review, research gaps which may be worth investigating are given.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.