| Issue |
E3S Web Conf.
Volume 642, 2025
5th European Conference on Unsaturated Soils and Biotechnology applied to Geotechnical Engineering (EUNSAT2025 + BGE)
|
|
|---|---|---|
| Article Number | 04010 | |
| Number of page(s) | 6 | |
| Section | EUNSAT2025 - Studies on Coupled Phenomena | |
| DOI | https://doi.org/10.1051/e3sconf/202564204010 | |
| Published online | 14 August 2025 | |
THM modelling for the HotBENT experiment using a 3D model
1 Obayashi, Nuclear Facilities Division, Shinagawa Intercity Tower B 2-15-2, Konan, Minato-ku Tokyo 108-8502, Japan
2 Nagra, Hardstrasse 73, 5430 Wettingen, Switzerland
* Corresponding author: sato.shin.ro@obayashi.co.jp
The HotBENT experiment being conducted at the Grimsel Test Site investigates the effects of temperatures up to 200 °C at the surface of waste disposal containers on buffer materials and the host rock of a deep geological repository. The objective of this experiment is to reduce the repository footprint by increasing the thermal loading of the containers while taking into account that vapour convection, delayed saturation and time-dependent density distribution can occur in a high-temperature environment due to the strong thermal gradients. So far, a TH-coupled analysis has been performed for the HotBENT experiment, but the results have not been benchmarked by means of a THM-coupled analysis using a 3D model. Therefore, in this study, a 3D THM-coupled analysis was performed to investigate the reproducibility of the mechanical effects in a high-temperature environment. Results show that this study was able to partially reproduce the trends of the temperature sensors installed in the experiment. To improve the reproducibility of the analysis results, it was found that it is not only necessary to modify the constitutive law of thermal conductivity or the parameters, but also to reconsider the parameters of the two-phase flow.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.